Top 10 Front Panel USB 3.2 UK – USB Port Cards

As an Amazon Associate I earn from qualifying purchases.

1. Xiatiaosann

#ad

Motherboard Header Extension Adapter, Xiatiaosann USB 3.2 Gen 2 USB-C Front Panel Adapter Cable, USB C Female to 20 Pin USB Type E A-Key Male with PCI Bracket, 15.7", With Mesh dustproof baffle, Screw

#ad
Xiatiaosann #ad - Fully double shielded EMI/EFI wire to prevent internal and external noise interference. High quality: gold-plated copper contacts have high-quality data transmission performance. Wide compatibility: the panel mounted c-type female connector enables you to connect all USB C-type supporting devices, flash drives, tablets, mice, such as mobile phones, hubs, and other USB C peripherals.

Easy to use: you can quickly add ports through the type-E slots available on the motherboard and expand them to the PC chassis for connecting various external USB-C devices. Package contents1 x usb type-e to type-c extension Cable with PCI Bracket, 1 x Mesh dustproof baffle, 1 x Mesh dustproof baffle screw.

Plug and Play, no driver required. Super speed: use a superspeed cable that can support usb 3. 2 gen 2 10gbps / usb 3. 2 gen 2x2 20gbps, it is also backward compatible with USB 3. 2 gen 1 5gbps type-c devices note: A dedicated controller is required in the machine to see the full 20Gbps. The wire is soft but not easy to break, and has a durable and long service life.
BrandXiatiaosann #ad
ManufacturerXiatiaosann #ad
Part NumberST-XT-027
ModelST-XT-027

2. GRAUGEAR

#ad

Black, GRAUGEAR | USB 3.2 Gen2 Front Panel for 3.5 Inch | 1x USB-C + 2x USB-A | 10Gbps USB Type-C | 19-pin & Key-A 20-pin Header | Metal | PC Front Panel | G-MP01

#ad
GRAUGEAR #ad - 2 x usb type-a with a data transfer rate of up to 5 Gbit/s. Front panel with 1 x usb type-c 10 gbit/s and 2 x USB Type-A 5 Gibt/s ports. 1 x usb type-c with a data transfer rate of up to 10 Gbit/s in USB front panel. Pc frontpanel fits into a standard 3. 5 inch drive bay. Easy installation and supports Windows.
BrandGRAUGEAR #ad
ManufacturerCHAB GmbH #ad
Height0.98
Length4.02
Width4.02
Part Number18030
ModelG-MP01
Warranty2 Year Limited Warranty

3. EZDIY-FAB

#ad

Extend USB Type E Ports to PCs Front Panel USB Ports, EZDIY-FAB USB 3.0 USB3.1 Gen 1 Internal Header 19-Pin to USB 3.1/3.2 Type-C 20-Pin A-Key Front Panel 180 Degrees Adapter

#ad
EZDIY-FAB #ad - Please off the power before installation. Save your old m/bs, so that it can support the latest USB TYPE-C interface, easy access to USB C devices.

Data transfer speed is based on USB3. 0, its up to 5Gbps in max. Plug and play, its just an extension/port no need to install drivers. 180 degress connector interface, avoid assembly interference caused by the position of the motherboard connector or the internal structure of the chassis. Compatible with all brand motherboard USB 3. 0 19-pin header, will works on all Windows and Linux systems. Can be used with ezdiy-fab usb3. 1 cable or front panel hub, b07h18nb7f, seacrch b07ZH1FQM5, B07ZH3ZQK8, B07DVBRZR9.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Weight0.04
Part NumberDE2-NEW 3.0 20PIN adapter-E
ModelUK2-NEW 3.0 20PIN adapter-E

4. GRAUGEAR

#ad

Front panel for 3.5 inch slot, 2 x USB-C + 2 x USB-A USB3.2 Gen2 hub, GRAUGEAR 4 ports 10 Gbit/s front panel, USB3.2 Gen2 key A 20-pin header, G-MP02, metal

#ad
GRAUGEAR #ad - Cable length: 60 cm usB 3. 2 gen2 A-key. Front panel with 2 x usb type-C / 2 x USB Type-A ports. 4-way usb 3. 2 gen2 usB ports in front. System requirements: 1x internal USB 3. 2 gen2, gen2x2 key A host 20-pin header. Fits into a standard 3. 5 inch drive bay. 2 x usb type-a with a data transfer rate of up to 10 Gbit/s. Metal casing. 2 x usb type-c with a data transfer rate of up to 10 Gbit/s.
BrandGRAUGEAR #ad
ManufacturerCHAB GmbH #ad
Height0.98
Length4.02
Weight0.18 kg (0.4 Pounds)
Width4.02
Part Number18045
Model18045

5. EZDIY-FAB

#ad

Extend USB Type E Ports to PCs Front Panel USB Ports, EZDIY-FAB USB 2.0 Internal Header 9-Pin to USB 3.1/3.2 Type-C 20-Pin A-Key Front Panel 180 Degrees Adapter

#ad
EZDIY-FAB #ad - Plug and play, its just an extension/port no need to install drivers. Please off the power before installation. 180 degress connector interface, avoid assembly interference caused by the position of the motherboard connector or the internal structure of the chassis.

Compatible with all brand motherboard USB 2. 0 9-pin header, will works on all Windows and Linux systems. Transfer speed is based on usb 2. 0, 9-pin uSB2. 0, only USB2. 0 rate is transferred out. Save your old m/bs, so that it can support the latest USB TYPE-C interface, easy access to USB C devices. Can be used with ezdiy-fab usb3. 1 cable or front panel hub, b07zh3zqk8, b07h18nb7f, seacrch B07ZH1FQM5, B07DVBRZR9.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Weight0.04
Part NumberDE2-NEW2.0 9PIN adapter-E
ModelUK2-NEW2.0 9PIN adapter-E

6. Graugear

#ad

Graugear | 6 interfaces front panel in 3.5 inches | USB3.2 Gen2 2x2 Type-C up to 20 Gbit/s | 2x USB-A + USB-C | SD+microSD card reader | Key-A 20-pin & 19-pin header | Metal | G-MP01 CR

#ad
Graugear #ad - 2 x usb type-a and 1 x type-c with a data transfer rate of up to 5 Gbit/s. 1 x usb type-c with a data transfer rate of up to 10 Gbit/s in multi front panel. Pc frontpanel fits into a standard 3. 5 inch drive bay. Supports Windows.
BrandGraugear #ad
ManufacturerCHAB GmbH #ad
Height0.98
Length4.02
Weight0.37
Width4.02
Part NumberG-MP01CR
ModelG-MP01CR
Warranty2 year manufacturer

7. EZDIY-FAB

#ad

EZDIY-FAB 5.25in 10Gbps USB 3.1 Gen2 Hub and Type-C Port,Front Panel USB Hub with QC 3.0 Quick Charging

#ad
EZDIY-FAB #ad - Elegant brushed aluminum alloy panel, Dimension Fit any 5. 25” computer case front bay. The vertexhub has three ports for any type of legacy USB-A peripheral device you have. 1x usb type-c 3.

1 gen2 port: the ezdiy hub is focused on the future of usb-c and its most versatile and powerful specifications. 2x qc3. 0 charging ports, charging only, provides short-circuit, over-current, over-voltage, built-in smart IC chip, over-charge protection, over-heat, max out 18w/port, no data transfer. Upgraded to support 10 Gbps for each port and provide power delivery for tablets and phones.

5v/2. 4a. 3x usb-a gen2 ports: legacy usb-a ports will be sticking around for a while. Ultimate usb-c & usb-a charging and data hub: usb 3. 1 generation 2 compatible for all ports. The ezdiy hub was built for power users to replace their old legacy USB 3. 0 hubs. 5v/3a. Transfer data at 10 Gbps for each port.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberIT2-NEW 5.25 HUB-G2

8. BEYIMEI

#ad

5Gbps USB 3.2 GEN1 Converter Header for Windows 11/10/8/7 LINUX MAC, BEYIMEI USB3.2 19PIN to Internal Dual USB 3.2 GEN1 19PIN Adapter Card, Extend 4 Front Panel USB 3.0 Port

#ad
BEYIMEI #ad - Compatible with usb 3. 2, usb 3. 0, usb 3. 1, usb 2. 0 and uSB1. 1. Package included1* 19pin to usb front panel adapter card, plug and play, easy installation. 2 ports 19pin usb 3. 2 headerthe usb front panel expansion card provides 2 internal 19pin USB3.

2 gen1 interface this can be DIY extended to the other 4 USB ports. Compatibilitysystem support win7 win8 win10 win11 32bit/64bit linux mac. 2 types of input portsa usb 3. 2 port + a 4pin power port. No driver required, please contact us in time. The usb port is connected to the 19pin interface of the motherboard through a 19pin to usb cable to obtain data, the 4pin port can get power from the motherboard and ensure the front panel USB adapter is stable operation.

5gbps high-speed transmissionusing gl3510 master control and high-performance electronic components, it improves the stability of data transmission and allows you to quickly access your files with a transfer rate of up to 5Gbps. If you have any questions about this product, 1* SATA 4PIN cable, 1* 19PIN to USB cable, 2* Insulation pads.
BrandBEYIMEI #ad
ManufacturerBEYIMEI #ad
Warranty6 months

9. EZDIY-FAB

#ad

EZDIY-FAB USB 3.0 USB3.1 Gen 2 Internal Header 19-Pin to USB 3.1/3.2 Type-C 20-Pin A-Key Front Panel 180 Degrees Adapter, Extend USB Type E Ports to PCs Front Panel USB Ports

#ad
EZDIY-FAB #ad - International products have separate terms, are sold from abroad and may differ from local products, age ratings, and language of product, including fit, labeling or instructions.

Compatible with all brand motherboard USB 3. 0 19-pin header, will works on all Windows and Linux systems. Plug and play, b07zhbt4s6, seacrch b07zhcn2cx, its just an extension/port no need to install drivers. Please off the power before installation. Can be used with ezDIY-FAB USB3. 1 cable or front panel hub, b078Z52Y1X, B07DVBRZR9. Save your old m/bs, so that it can support the latest USB TYPE-C interface, easy access to USB C devices. Data transfer speed is based on USB3. 0, its up to 5Gbps in max.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberUS-USB3.0 20in adapter-E
ModelEZDPC181

10. Lazmin112

#ad

For Win 7/8/10/2003, for Linux, for Win XP, USB Hub with 2 X Type C 2 X USB 3.0 2 X USB 2.0, USB 3.2 Front Panel, for OS X Laptop, USB3.2GEN1 5Gbps, for Desktop Chassis

#ad
Lazmin112 #ad - Comes with screw kit, and it can be easily installed and detached, saving your time and effort. Multiple interfaces: this floppy drive panel is designed with 2 Type C interfaces, 2 USB 3.

0 interfaces and 2 USB 2. 0 interfaces, meeting your diverse needs. High speed: this usb front panel supports up to 5gbps ultra high speed transmission. Front panel hub: this front floppy drive panel offers multiple interfaces that allow more convenient connection, and you do not need to bend over to find the interfaces at the back. Suitable for win xp, for win 7/8/10/2003, for OS X Laptop, for Linux. Easy installation: this floppy drive front panel is plug and play. For gl3520 chipset: this usb 3. 2 front panel hub has for GL3520 chipset, which ensures fast and stable data transmission, safe and reliable.
BrandLazmin112 #ad
ManufacturerLazmin112 #ad
Part NumberLazmin112osmyptaq25
ModelLazmin112osmyptaq25